Any Location

Email Us

info@neftonexportsind.com

Contact Us

+91 892823 8906                 +91 892823 3263

Timings

Mon-Fri 9AM-7PM IST

Menu

Yield Steel Plate

 

With availability in both structural and pressure vessel grades in a wide range of plate sizes and thicknesses. Steel can be supplied as plates, cut plates, or profiles (cut to shape).

We recognise the need for an ex-stock source of 460 yield plate and are able to offer the following material:

  • « EN 10028-3 P460NL1
  • « EN 10028-3 P460NL2
  • « EN 10028-3 P460NH
  • « EN 10025-3 S460N
  • « EN 10025-3 S460NL

Applications

  • « Bridges
  • « Grouted tees/Grouted sleeves
  • « Pipe caps/Pipe fittings
  • « Pipe lines
  • « Plate girders
  • « Pressure vessels
  • « Road tankers

Technical SpecificationsThe information below gives an overview: more detailed information on specific grades may be found on the product pages in this section of the web site.

C
max
Si
max
Mn
max
P
max
S
max
Al total
min
N
max
0.20 0.60 1.10 to 1.70 0.020 0.005 0.020 0.025
Chemical Composition (Ladle %)
Cr
max
Cu
max
Mo
max
Nb
max
Ni
max
Ti
max
V
max
0.30 0.70 0.10 0.05 0.80 0.03 0.20
Average Maximum
Optim 700 MC 0.37% 0.41%
Carbon Equivalent (CEV)

 

Yield Steel Plate EN 10028:3 P460NL1

The designation EN 10028:3 P460NL1 shows that this is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which is impact tested in the transverse direction at -40 deg C (NL1).

As well as P460NL1 we are stockists of other EN 10028:3 plates manufactured and certified to:

  • « EN 10028:3 P355NL1 EN 10028:3 P355NL2 EN 10028:3 P355NH
  • « EN 10028:3 P460NH EN 10028:3 P460NL2 EN 10028:3 P275NH
  • « We also carry stocks of plates certified to EN 10028:2 P265GH

Chemical Requirements – P460NL1 (cast analysis, % by mass, maximum permitted unless indicated otherwise)

C Si Mn P S Altotal * N Cr
0.20 0.60 1.10-1.70 0.025 0.015 0.020 min 0.025 0.30
Cu ** Mo Nb Ni Ti V Nb+Ti+V
0.70 0.10 0.05 0.80 0.03 0.20 0.22

Tensile Requirements – P460NL1

Product Thickness Yield Strength MPa Tensile Strength MPa Elongation A%
up to 16 mm 460 min 570 to 730 17 min
16 to 40 mm 445 min 570 to 720 17 min
over 40 to 60 mm 430 min 570 to 720 17 min
over 60 to 100 mm 400 min 540 to 710 17 min

Impact energy values for the normalised condition a) transverse

-50 OC -40 OC -20 OC 0 OC +20 OC
27 J min 35 J min 50 J min 60 J min

b) longitudinal

-50oC -40oC -20oC 0 OC +20oC
30 J min 40 J min 50 J min 70 J min 80 J min

 

Yield Steel Plate EN 10028:3 P460NL2

The designation EN 10028:3 P460NL2 shows that this is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which is impact tested in the transverse direction at -50 deg C (NL2).

As well as P460NL2 we are stockists of other EN 10028:3 plates manufactured and certified to:

  • « EN 10028:3 P355NL1 EN 10028:3 P355NL2 EN 10028:3 P355NH
  • « EN 10028:3 P460NH EN 10028:3 P460NL1 EN 10028:3 P275NH
  • « We also carry stocks of plates certified to EN 10028:2 P265GH

Chemical Requirements – P460NL2 (cast analysis, % by mass, maximum permitted unless indicated otherwise)

C Si Mn P S Altotal * N Cr
0.20 0.60 1.10-1.70 0.020 0.010 0.020 min 0.025 0.30
Cu ** Mo Nb Ni Ti V Nb+Ti+V
0.70 0.10 0.05 0.80 0.03 0.20 0.22

Tensile Requirements – P460NL2

Product Thickness Yield Strength MPa Tensile Strength MPa Elongation A%
up to 16 mm 460 min 570 to 730 17 min
16 to 40 mm 445 min 570 to 720 17 min
over 40 to 60 mm 430 min 570 to 720 17 min
over 60 to 100 mm 400 min 540 to 710 17 min

Impact energy values for the normalised condition a) transverse

-50 OC -40 OC -20 OC 0 OC +20 OC
27 J min 30 J min 40 J min 60 J min 70 J min

b) longitudinal

-50oC -40oC -20oC 0 OC +20oC
42 J min 45 J min 55 J min 75 J min 85 J min

 

Yield Steel Plate EN 10028:3 P460NH

The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes. EN 10028:3 P460NH is steel for pressure purposes (P) with minimum yield strength of 460 MPa (460) which has specified elevated temperature properties (NH).

As well as P460NH we are stockists of other EN 10028:3 plates manufactured and certified to:

  • « EN 10028:3 P355NL1 EN 10028:3 P355NL2 EN 10028:3 P355NH
  • « EN 10028:3 P460NL1 EN 10028:3 P460NL2 EN 10028:3 P275NH
  • « We also carry stocks of plates certified to EN 10028:2 P265GH

Chemical Requirements (cast analysis, % by mass, maximum permitted unless indicated otherwise)

C Si Mn P S Al N Cr
0.20 0.60 1.10-1.70 0.025 0.015 0.020 min 0.025 0.30
Cu** Mo Nb Ni Ti V Nb+Ti+V
0.70 0.10 0.05 0.80 0.03 0.20 0.22

Tensile Requirements

Product Thickness Yield Strength MPa Tensile Strength MPa Elongation A%
up to 16 mm 460 min 570 to 730 17 min
16 to 40 mm 445 min 570 to 720 17 min
over 40 to 60 mm 430 min 570 to 720 17 min

 

Yield Steel Plate EN 10025:3 S460N

The specification EN 10025:3 covers weldable structural steels manufactured with a fine grain structure and supplied in the normalised condition or in an equivalent condition obtained by normalised rolling. There are four grades (S275, S355, S420 and S460) which indicate each grade’s minimum yield strength (in MPa) for plates 16 mm thick and below. Each grade is further sub-divided based on the specified minimum value of impact energy at a particular temperature. N indicates temperatures not lower than -20 deg C and NL not lower than -50 deg C.

The designation EN 10025:3 S460N shows that this is steel for structural purposes (S) with minimum yield strength of 460 MPa (460) which is impact tested at -20 deg C (N).

As well as S460N we are stockists of plates to EN 10025:3 S460NL

Chemical Requirements – S460N (cast analysis, % by mass, maximum permitted unless indicated otherwise)

C Si Mn P S Altotal * N Cr
0.20 0.60 1.00-1.70 0.030 0.025 0.020 min 0.025 0.30
Cu ** Mo Nb Ni Ti V Nb+Ti+V Mo+Cr
0.55 0.10 0.05 0.80 0.05 0.20 0.22 0.30

Tensile Requirements – S460N

Product Thickness Yield Strength MPa Tensile Strength MPa Elongation
up to 16 mm 460 min 540 to 720 17 min
16 to 40 mm 440 min 540 to 720 17 min
over 40 to 63 mm 430 min 540 to 720 17 min
over 63 to 80 mm 410 min 540 to 720 17 min
over 80 to 100 mm 400 min 540 to 720 17 min
over 100 to 150 mm 380 min 530 to 710 17 min
over 150 to 200 mm 370 min 530 to 710 17 min

 

Yield Steel Plate EN 10025:3 S460NL

The designation EN 10025:3 S460NL shows that this is steel for structural purposes (S) with minimum yield strength at 16 mm thick and below of 460 MPa (460) and which has specified minimum impact energy values at temperatures not lower than -50 deg C (NL).

As well as S460NL we are stockists of plates to EN 10025:3 S460N

Chemical Requirements – S460NL (cast analysis, % by mass, maximum permitted unless indicated otherwise)
C Si Mn P S Altotal * N Cr
0.20 0.60 1.00-1.70 0.025 0.020 0.020 min 0.025 0.30
Cu ** Mo Nb Ni Ti V Nb+Ti+V Mo+Cr
0.55 0.10 0.05 0.80 0.05 0.20 0.22 0.30

Tensile Requirements – S460NL

Product Thickness Yield Strength MPa Tensile Strength MPa Elongation
up to 16 mm 460 min 540 to 720 17 min
16 to 40 mm 440 min 540 to 720 17 min
over 40 to 63 mm 430 min 540 to 720 17 min
over 63 to 80 mm 410 min 540 to 720 17 min
over 80 to 100 mm 400 min 540 to 720 17 min
over 100 to 150 mm 380 min 530 to 710 17 min
over 150 to 200 mm 370 min 530 to 710 17 min

Impact energy values for the normalised condition a) longitudinal

-50 OC -40 OC -30oC -20 OC -10oC 0 OC +20 OC
27 J min 31 J min 40 J min 47 J min 51 J min 55 J min 63 J min